What would you buy next year with a new, dynamic and fast motorcycle? Then you should be aware of the YZF-R1 2012, from Yamaha. The YZF-R1 has a new look. Fast models from the series YZF-M1 were the inspiration. What has been proven there was introduced into the new YZF-R1 2012th.
The improved
The performance and safety of the YZF-R1 has been improved. Received for the new machine is a 6-speed traction control. It controls the speed of the front and rear. Slip on the rear wheel trends are reported by a warning signal to the engine control unit. Immediate lube regulated opening degree of the throttle and ignition timing. The 6 different modes of traction control allow an improved adaptation of the motorcycle to the different environmental conditions. Expand the range of uses and allow for more control over the vehicle. Hence a higher degree of safety is ensured.
It was the revised engine management system. With a change in the degree of throttle opening, fuel injection volume and ignition timing of an improved performance at low and medium engine speed range is possible. You have the car under better control. The unfolding of the torque is so predictable and easily controlled. The YZF-R1 2012 is characterized by a higher level of security and improved road traction, especially incurves.
The firing of the engine is at 270 ° - 180 ° - 90 ° - 180 ° uneven. The liquid-cooled four-cylinder engine has a special firing interval. The 2012 YZF-R1 has a linear torque development. The machine therefore offers an exceptional driving characteristics and a high degree of driving pleasure. Together with the new YZF-R1 2012 you get the right bike accessories.
The new look of the YZF-R1
A new feature is the appearance of the YZF-R1. She has received a new front fairing. The pages have been revised; the central point was taken up. The frontal area was lower. Below the headlamps, there is a slight opening. The front panel above the headlight is emphasized. Particularly striking are the LED position lights on the front panel. Below the headlamps, the front panel has received a reflective surface. The foot-pegs have been revised to provide even better support. The upper fork bridge was on the YZF-M1, the proven race machine, ajar. It is made of cast aluminium. The cover of the muffler clings to even better and now hexagonal.
No comments:
Post a Comment